An AerialMOB Replacement Part for use in a TBS Discovery or Discovery PRO Multicopter.
This piece replaces the part to which the Motor is being mounted on and is designed for use with TBS 400KV Motors. The Mounting Area is angled inwards by 7° and, with the use of T-Motor 15x5 CF Props, should leave ~12mm Clearance from the tip of the Prop to the CF Boom below.
Each Piece is labeled with either F ( front ) or R ( rear ) and a ▲ or ▼ pointing Arrow indicating the rotation of the Prop and uses the stock M4 Screws that come with an AerialMOB Arms SET but requires the additional Purchase of matching M4 Nuts.
Do NOT buy this if you intend to use it on anything else than a Discovery or Discovery PRO Frame as the Mounting Areas also have a twist in them thus accounting for the asymmetrical Front-to-Rear shape of the Discovery Frame.
Installing these on a Front-to-Rear and Left-to-Right symmetrical Frame ( a perfect X with 90° angled Arms ) will most likely have it fly with a backwards tendency!
Larger Version of Discovery PRO Full Shot PictureI cannot be held responsible for any damages caused by the use of this part - Use at your own risk.