Click and drag to rotate
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.

DIGITAL PREVIEW
Not a Photo

Parts primed -floor sold apart-.
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT 3d printed Nav seat painted.
YT1300 DEAGO COCKPIT 3d printed Nav seat painted.

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.
YT1300 DEAGO COCKPIT 3d printed Parts primed -floor sold apart-.

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT 3d printed
YT1300 DEAGO COCKPIT 3d printed

DIGITAL PREVIEW
Not a Photo

YT1300 DEAGO COCKPIT

Made by
Print With Shapeways
Choose Your Material
$38.61
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Falcon cockpit for the DeAgo kit

I've designed a complete cabin cockpit to replace the stock one composed by the main consoles and four seats.

On this product you will receive one -1- cockpit composed by  one main console, two pilot seats and two nav seats -that are smaller than the stock ones,  that are too big-.

This cockpit has the size to fit inside the cabin tube, but you will have to trim a little bit the rounded tab of the tube of the DeAgo Falcon. My cabin cockpit is designed to enter deeper on the cabin tube than the stock one. So you must sand the two side tabs inside the cabin tube to fit my backwall and the long cabin. 

This upgrade it's a very close replica from the cockpit seen on the studio filming model. It has all the little details. I've designed it to allow fiber optics lighting or you can put a led under the console, on the built in bottom hole, and play with the unpainted surfaces for lighting effects.

The main console has built in pre drilled holes for fiber optics too -0.25 mm-.


This product has been designed to fit the cabin walls and cabin cone that you can find in this shop. This cockpit is not intended to be installed with the stock cockpit of the DeAgo kit. Do not buy it if you aren't an advanced modeller.

You can find the cabin walls and cabin cone that fit this cabin cockpit on these links, and you can buy also the side consoles:

YT1300 DeAgo cabin cone

YT1300 DeAgo cabin walls

YT1300 DeAgo Cockpit side consoles

If you order from Europe, this product will be printed in Europe, on the Netherlands, so don't worry for high shipping costs or customs fees.
Details
What's in the box:
YT1300 DEAGO COCKPIT W CONSOLE DRILLED W SEATS
Dimensions:
7.11 x 3.76 x 2.24 cm
Switch to inches
2.8 x 1.48 x 0.88 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.